Fun Conversations
The DeLorean often leads to conversations one wouldn't normally expect. Case in point: today I had to call my auto insurance provider for an issue with my daily driver. After taking some info to pull up my account the conversation went something like this:

Agent: Which car is this?
Me: The Pontiac.
Agent: Am I reading this right?
Me: Reading what?
Agent: I'm sorry, do you have a DeLorean?
Me: Yes.
Agent: I never thought I'd see someone with a policy on a DeLorean.
Me: Well, you've insured both of mine...
Agent: You've had two DeLoreans?
Me: Yes.

At that point there were a few more questions and then we got back to the issue which my phone call had been about originally.

[/dmc] [permanent link]

FreeBSD Unix on Dell Precision M4800
I installed FreeBSD 10.3 on the laptop I recently acquired and almost eveything worked out of the box. The gigabit ethernet and wi-fi coards worked fine and by setting the BIOS to discrete graphics only, the nVidia Quadro was recognized.

I installed the binary driver from nVidia, because they support FreeBSD because they're awesome like that. The nvidia-xconfig(1) program was useful to streamline the process of getting X.org to use the Quadro.

There were a few things that did need some tewaking though. First there's the sound card. Because the quadro supports HDMI (in addition to VGA and DisplayPort), it includes an HDA-compliant sound card. This card is recognized before the primary HDA-compliant sound card in the machine, the one that's actually connected to the speakers.

I did some research and there were some suggestions about using sysctl(8) to control soundcard GPIO pins to connect the nVidia sound device to the speackers but what ultimately worked was using sysctl(8) to change the default primary sound device to the dedicated card. There were a few ways to make this happen but the one I found that actually worked was to place sysctl(8) command lines in /etc/rc.local.

First I found the device I wanted as the default:

mforde@gaz:~> cat /dev/sndstat 
Installed devices:
pcm0:  (play) default
pcm1:  (play)
pcm2:  (play) 
pcm3:  (play)

Device pcm2 was the one I wanted so I added the following lines to /etc/rc.local

sysctl hw.snd.default_unit=2
sysctl hw.snd.default_auto=2

Now when boot completes pcm2 is set to my default and sound "just works" and sndstat shows pcm2 as the default.

I found ACPI support has some weirdness as ACPI support often does. What I found was that Suspend works from console, but resume doesn't... HOWEVER After I start X ACPI suspend and resume work just fine. Normally I prefer to boot into a console and only start X if I really need it, but because I want suspend and resume to work "by default" I've enabled X to start at boot by allowing the xdm console in /etc/ttys.

But this had one last issue. See, when manually starting X, I added the -dpi 143 option to get graphics and text to be appropriately sized for my screen. XDM needed to know about this.

This probably wasn't the best place to do it, but I edited /usr/local/lib/X11/xdm/XServers and modified the call to X(7) to add the -dpi 143 option. Now when Xdm loads at start up, the DPI is set correctly.

The function keys for adjusting the screen brightness don't work; however, xbacklight(1) works just fine. Similarly the volume keys don't work but I can adjust the volume quite easily with aumix(1).

I've submitted my dmesg output to NYCBUG's dmesgd repository.

I suppose I've posted this for two reasons. The first is so I have a record of how I eventually got these little things working in case I have to do it again. The second is in case anyone has similar issues with their hardware; if they happen to stumble upon this, it might give them some hints.

[/unix] [permanent link]

Product Review: Nike Tailwind 2008
Welcome to a new feature on this blog. I'm going spend some time writing what I think of various running related items such as shoes, clothes, and energy gels.

My first review is the Nike Tailwind 2008 running shoe. At this point, they're a little hard to find as they have been replaced by the Tailwind 2009. From what I've read about the 2009 edition, not much has changed so much of this should still be relevant.

What first drew me to this running shoe was the Air Max cushioning. Like many Nikes, the heel contained the Air pockets. Unlike many other Nikes, these also had the Air Max cushioning in the forefoot.

I tried them on and they were snug, but not too tight. Perfect. They were already on sale by time I was buying them. Even better.

I ran about 400 miles in my first pair in about six months time, and replaced them with another pair which lasted about another four months. During this time the shoes served me well on treadmills as well as road and trail courses.

These shoes, however, are best for heavier runners. The cushioning is very firm and needs extra weight to compress properly for maximum impact absorption. When I first started wearing the Tailwinds, I was about two months into my training and was about 210lbs. As I ran more, I lost more weight. At 180lbs the shoes were still quite good. At 160lbs they still provided adequate cushioning, although I started to feel my runs more.

The Tailwinds served me well until I was under 140lbs. Below that and they feel like running in clogs.

I recommend the Nike Tailwinds for heavier runners with normal to low arches. The men's Tailwind 2009 can be found on the EastBay website for $79.99 (99.99 for women's) as of this writing, making them a relatively affordable running shoe.

Next time, we'll discuss my current running shoe, the ASICS Cumulus-10.

[/running/reviews] [permanent link]

July Update
Tuesday night was the Party with Purpose 5K in Hoboken. I did much better than last year, but I'm a little disappointed. They only had it set up to record gun time rather than net time. The actual start line wasn't marked very clearly either. Officially my time was 20:20 but if it took me more than 4 seconds to cross the start line, then I got a PR. But the world will never know.

Last night was the Verizon Wireless Classic 5K corporate challenge race in Morristown. They calculated net time, but rather than reading the RFID tag as you cross the finish line, there was a guy about 10 to 15 feet past the line waving an RFID reader wand over your tag. So you cross the line... and stop running... and walk a bit... and then your finish time is recorded. Other than that, it was a decent run. I was again disappointed in the results, finishing in 20:48.

I may try the Teterboro 5K at the airport tomorrow, or I may just do a 20 mile training run. I haven't decided yet.

[/running] [permanent link]

It's like I'm 16 again
You'd think I would have learned to drive by now. I've had the DeLorean for a month now and I'm still a little shaky coming off stop lights and signs but over all I'm better. I've only driven it a handful of times and I should really be driving it more often if I want to get better.

I'm thinking of adding a separate section to the site dedicated to the DeLorean and every step in the process of acquiring it. I found a lot of useful information on the websites of other owners that helped a lot.

[/dmc] [permanent link]

I think I'll take the DeLorean today...
After taking the Pontiac to inspection this morning, I got the urge to drive the DeLorean. I need to drive it more anyway so I think it may be joining me on some errands this morning.

[/dmc] [permanent link]