Eponymous

FreeBSD Unix on Dell Precision M4800
I installed FreeBSD 10.3 on the laptop I recently acquired and almost eveything worked out of the box. The gigabit ethernet and wi-fi coards worked fine and by setting the BIOS to discrete graphics only, the nVidia Quadro was recognized.

I installed the binary driver from nVidia, because they support FreeBSD because they're awesome like that. The nvidia-xconfig(1) program was useful to streamline the process of getting X.org to use the Quadro.

There were a few things that did need some tewaking though. First there's the sound card. Because the quadro supports HDMI (in addition to VGA and DisplayPort), it includes an HDA-compliant sound card. This card is recognized before the primary HDA-compliant sound card in the machine, the one that's actually connected to the speakers.

I did some research and there were some suggestions about using sysctl(8) to control soundcard GPIO pins to connect the nVidia sound device to the speackers but what ultimately worked was using sysctl(8) to change the default primary sound device to the dedicated card. There were a few ways to make this happen but the one I found that actually worked was to place sysctl(8) command lines in /etc/rc.local.

First I found the device I wanted as the default:

mforde@gaz:~> cat /dev/sndstat 
Installed devices:
pcm0:  (play) default
pcm1:  (play)
pcm2:  (play) 
pcm3:  (play)

Device pcm2 was the one I wanted so I added the following lines to /etc/rc.local

sysctl hw.snd.default_unit=2
sysctl hw.snd.default_auto=2

Now when boot completes pcm2 is set to my default and sound "just works" and sndstat shows pcm2 as the default.

I found ACPI support has some weirdness as ACPI support often does. What I found was that Suspend works from console, but resume doesn't... HOWEVER After I start X ACPI suspend and resume work just fine. Normally I prefer to boot into a console and only start X if I really need it, but because I want suspend and resume to work "by default" I've enabled X to start at boot by allowing the xdm console in /etc/ttys.

But this had one last issue. See, when manually starting X, I added the -dpi 143 option to get graphics and text to be appropriately sized for my screen. XDM needed to know about this.

This probably wasn't the best place to do it, but I edited /usr/local/lib/X11/xdm/XServers and modified the call to X(7) to add the -dpi 143 option. Now when Xdm loads at start up, the DPI is set correctly.

The function keys for adjusting the screen brightness don't work; however, xbacklight(1) works just fine. Similarly the volume keys don't work but I can adjust the volume quite easily with aumix(1).

I've submitted my dmesg output to NYCBUG's dmesgd repository.

I suppose I've posted this for two reasons. The first is so I have a record of how I eventually got these little things working in case I have to do it again. The second is in case anyone has similar issues with their hardware; if they happen to stumble upon this, it might give them some hints.

[/unix] [permanent link]

For example, perl's LWP::UserAgent sets the agent string per default to "libwww-perl/#.#". Google apparently doesn't like that and will not return results to you. Setting it to something like "Mozilla/5.0 (X11; U; NetBSD i386; en-US; rv:1.8.1.3)" would work. Interestingly, they appear to whitelist agents, rather than blacklisting them.

Eponymous

	About My Infrequently Updated Blog. The web-based journal of M. Forde, computer nerd, endurance athlete, and DeLorean owner contact Subscribe Subscribe to a syndicated feed of my weblog, brought to you by the wonders of RSS. Flavors There's more than one way to view this weblog; try these flavors on for size. index circa 1993 Sections main musings running DeLorean code unix album TBM Archives 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 Disclaimers, Copyrights, Privacy, Etc. ToS Copyrights Links olix0r.net netmeister.org Giraffes Eat. Run. Sleep.	27 Dec 2007 Optical Illusion I saw this today. I thought it was interesting. [/musings] [permanent link]

Eponymous

	About My Infrequently Updated Blog. The web-based journal of M. Forde, computer nerd, endurance athlete, and DeLorean owner contact Subscribe Subscribe to a syndicated feed of my weblog, brought to you by the wonders of RSS. Flavors There's more than one way to view this weblog; try these flavors on for size. index circa 1993 Sections main musings running DeLorean code unix album TBM Archives 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 Disclaimers, Copyrights, Privacy, Etc. ToS Copyrights Links olix0r.net netmeister.org Giraffes Eat. Run. Sleep.	24 Aug 2016 An Observation There is something satisfying about driving in a DeLorean while listening to The Clash's Live: From Here to Eternity. [/dmc] [permanent link]

Eponymous

	About My Infrequently Updated Blog. The web-based journal of M. Forde, computer nerd, endurance athlete, and DeLorean owner contact Subscribe Subscribe to a syndicated feed of my weblog, brought to you by the wonders of RSS. Flavors There's more than one way to view this weblog; try these flavors on for size. index circa 1993 Sections main musings running DeLorean code unix album TBM Archives 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 Disclaimers, Copyrights, Privacy, Etc. ToS Copyrights Links olix0r.net netmeister.org Giraffes Eat. Run. Sleep.	18 Jun 2016 FreeBSD Unix on Dell Precision M4800 I installed FreeBSD 10.3 on the laptop I recently acquired and almost eveything worked out of the box. The gigabit ethernet and wi-fi coards worked fine and by setting the BIOS to discrete graphics only, the nVidia Quadro was recognized. I installed the binary driver from nVidia, because they support FreeBSD because they're awesome like that. The nvidia-xconfig(1) program was useful to streamline the process of getting X.org to use the Quadro. There were a few things that did need some tewaking though. First there's the sound card. Because the quadro supports HDMI (in addition to VGA and DisplayPort), it includes an HDA-compliant sound card. This card is recognized before the primary HDA-compliant sound card in the machine, the one that's actually connected to the speakers. I did some research and there were some suggestions about using sysctl(8) to control soundcard GPIO pins to connect the nVidia sound device to the speackers but what ultimately worked was using sysctl(8) to change the default primary sound device to the dedicated card. There were a few ways to make this happen but the one I found that actually worked was to place sysctl(8) command lines in /etc/rc.local. First I found the device I wanted as the default: mforde@gaz:~> cat /dev/sndstat Installed devices: pcm0: (play) default pcm1: (play) pcm2: (play) pcm3: (play) Device pcm2 was the one I wanted so I added the following lines to /etc/rc.local sysctl hw.snd.default_unit=2 sysctl hw.snd.default_auto=2 Now when boot completes pcm2 is set to my default and sound "just works" and sndstat shows pcm2 as the default. I found ACPI support has some weirdness as ACPI support often does. What I found was that Suspend works from console, but resume doesn't... HOWEVER After I start X ACPI suspend and resume work just fine. Normally I prefer to boot into a console and only start X if I really need it, but because I want suspend and resume to work "by default" I've enabled X to start at boot by allowing the xdm console in /etc/ttys. But this had one last issue. See, when manually starting X, I added the -dpi 143 option to get graphics and text to be appropriately sized for my screen. XDM needed to know about this. This probably wasn't the best place to do it, but I edited /usr/local/lib/X11/xdm/XServers and modified the call to X(7) to add the -dpi 143 option. Now when Xdm loads at start up, the DPI is set correctly. The function keys for adjusting the screen brightness don't work; however, xbacklight(1) works just fine. Similarly the volume keys don't work but I can adjust the volume quite easily with aumix(1). I've submitted my dmesg output to NYCBUG's dmesgd repository. I suppose I've posted this for two reasons. The first is so I have a record of how I eventually got these little things working in case I have to do it again. The second is in case anyone has similar issues with their hardware; if they happen to stumble upon this, it might give them some hints. [/unix] [permanent link]

Eponymous

	About My Infrequently Updated Blog. The web-based journal of M. Forde, computer nerd, endurance athlete, and DeLorean owner contact Subscribe Subscribe to a syndicated feed of my weblog, brought to you by the wonders of RSS. Flavors There's more than one way to view this weblog; try these flavors on for size. index circa 1993 Sections main musings running DeLorean code unix album TBM Archives 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 Disclaimers, Copyrights, Privacy, Etc. ToS Copyrights Links olix0r.net netmeister.org Giraffes Eat. Run. Sleep.	16 Aug 2017 This ends tonight... [/musings/self] [permanent link] Sometimes... Sometimes it's dificult to find a reason to continue. [/musings/self] [permanent link]

Eponymous

	About My Infrequently Updated Blog. The web-based journal of M. Forde, computer nerd, endurance athlete, and DeLorean owner contact Subscribe Subscribe to a syndicated feed of my weblog, brought to you by the wonders of RSS. Flavors There's more than one way to view this weblog; try these flavors on for size. index circa 1993 Sections main musings running DeLorean code unix album TBM Archives 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 Disclaimers, Copyrights, Privacy, Etc. ToS Copyrights Links olix0r.net netmeister.org Giraffes Eat. Run. Sleep.	05 Jan 2008 Google blocks browsers Netmeister has an interesting blurb about experience with Google blocking various UserAgents. From the posting: For example, perl's LWP::UserAgent sets the agent string per default to "libwww-perl/#.#". Google apparently doesn't like that and will not return results to you. Setting it to something like "Mozilla/5.0 (X11; U; NetBSD i386; en-US; rv:1.8.1.3)" would work. Interestingly, they appear to whitelist agents, rather than blacklisting them. What was that about not being evil? [/musings] [permanent link]

Eponymous

	About My Infrequently Updated Blog. The web-based journal of M. Forde, computer nerd, endurance athlete, and DeLorean owner contact Subscribe Subscribe to a syndicated feed of my weblog, brought to you by the wonders of RSS. Flavors There's more than one way to view this weblog; try these flavors on for size. index circa 1993 Sections main musings running DeLorean code unix album TBM Archives 2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 Disclaimers, Copyrights, Privacy, Etc. ToS Copyrights Links olix0r.net netmeister.org Giraffes Eat. Run. Sleep.	18 Jul 2008 Yet Another Charity 5K On August 4th I will be participating in Hoboken's 17th Annual 5K Run/Walk Against Crime & Drugs. Some police officers told me about the run on Tuesday after I finished the Party With Purpose run. They said the money raised would be donated to various Veterans' organizations. This run in August will be the same course as this week's, a map of which can be found here. I enjoyed the course. It was rather flat (especially compared to the Lincoln Tunnel Run) and there was a nice breeze coming off the Hudson. I urge any and all of you who will be in the area to participate in the event. More information can be found at Active.com. [/musings] [permanent link]